A highly compact bore hole drilling rig with a pull up force of 4450 kg capable of drilling6 ½” diameter up to 180 m depth. Drilling hole size range from 6 ½” to 8”.
- USD: $28,000.00
- EUR: € 26,275.20
- GHS: ₵374,920.01
- NGN: ₦34,440,000.00
- TZS: TSh72,464,000.00
- GBP: £22,670.76
- AED: د.إ102,821.60
- XOF: CFA17,225,320.07
- XAF: CFA17,225,320.07
- UGX: UGX106,607,197.27
- USD: $22,000.00
- EUR: € 20,644.80
- GHS: ₵294,580.01
- NGN: ₦27,060,000.00
- TZS: TSh56,936,000.00
- GBP: £17,812.74
- AED: د.إ80,788.40
- XOF: CFA13,534,180.05
- XAF: CFA13,534,180.05
- UGX: UGX83,762,797.85
Water Pump & bore hole drilling rig
KES4,805,279.85
- USD: $36,000.00
- EUR: € 33,782.40
- GHS: ₵482,040.01
- NGN: ₦44,280,000.00
- TZS: TSh93,168,000.00
- GBP: £29,148.12
- AED: د.إ132,199.20
- XOF: CFA22,146,840.09
- XAF: CFA22,146,840.09
- UGX: UGX137,066,396.48
A highly compact bore hole drilling rig with a pull up force of 4450 kg capable of drilling6 ½” diameter up to 180 m depth. Drilling hole size range from 6 ½” to 8”.
Application |
Domestic Water Wells Hole Diameter : 165 – 203 mm (6 ½” – 8") |
---|---|
Capacity |
Hole Diameter : 165 – 203 mm (6 ½” – 8") Maximum Depth : 180 m @ 165 mm (6 ½”) diameter |
Drilling Method |
DTH and Rotary Drilling |
Prime Mover |
Rig hydraulic system is powered from suitable Deck Engine – 69 hp |
Platform Structure |
Heavy I and C section welded steel structure covered with 5mm chequered plate |
Mast Assembly |
Strong structural steel twin tubular box type construction Mast Overall Length : 5000 mm Rotary Head Travel : 3700 mm Rod Handling : 3 m Centralizer Opening : 10 5/8” (270 mm) |
Mast Raising Cylinder |
Mast is raised and lowered by single hydraulic cylinder |
Feed System |
1 x Double acting hydraulic cylinder with 1:2 rope reeving system Pull Up Force: 6000 kgf @ 190 bar Pull Down Force: 3700 kgf @ 190 bar Pull Up Speed: 32 m/min Pull Down Speed: 52 m/min |
Rotary Head Assembly (Top Head Drive) |
Fabricated steel body with spur gear reduction and oil bath lubrication type gearbox along with top air entry and spindle with rope thread connection Maximum Torque : 2100 Nm Rotation Speed : 0 – 80 rpm Fine controlled |
Hydraulics |
2 x Fixed displacement pump for Feed and Rotation 1 x Fixed displacement pump for Auxiliary operations and Micro feed. Maximum System Pressure: 2755 psi (190 bar) Hydraulic Tank Capacity : 350 litres |
Control Panel |
Centralized control panel at rear end of the equipment for convenient view of drill table provided with all necessary gauges , control system and emergency switch. Locking arrangement is provided for the safety of control panel |
Levelling Jacks |
4 x Lug mounted Hydraulic levelling jacks are provided for quick setting and levelling of the drill rig. Locking check valves for safety with adequate capacity to withstand load |
Breakout Wrench |
Hydraulic operated break out wrench is provided for fast breaking of rod joints |
Water / Foam Injection Pump |
Hydraulic operated water injection triplex pump with necessary fittings , pressure regulator , flow regulator check valve and suction filter are provided Maximum Flow : 50 lpm Maximum Pressure : 50 kg/sq.cm |
Airline Lubricator |
A positive acting venturi type inline lubricator is provided for injecting oil to the down hole hammer Tank capacity : 5 litres |
Air Compressor |
Working pressure : 300 psi Make: Atlas Copco Compressor capacity 1100 cfm – 300 psi (21 bar) |
Mud Pump Option |
Engine driven Centrifugal Mud Pump : Discharge : 600 lpm Total Head : 30 mtr |
User Manual |
Manual for Operation , Maintenance and Spare Parts |
Mounting |
2 Axle Trolley |
Only logged in customers who have purchased this product may leave a review.
Related products
Water Pump Bore Drill with Compressor
- USD: $58,000.00
- EUR: € 54,427.20
- GHS: ₵776,620.02
- NGN: ₦71,340,000.00
- TZS: TSh150,104,000.00
- GBP: £46,960.86
- AED: د.إ212,987.60
- XOF: CFA35,681,020.14
- XAF: CFA35,681,020.14
- UGX: UGX220,829,194.34
Reviews
There are no reviews yet.